Automotive exterior components primarily refer to parts such as front and rear bumpers, wheel arches, grille, radiator grille, and bumper guards, which are attached to the vehicle body using bolts, clips, or double-sided tape. These components primarily serve decorative and protective functions on the vehicle exterior, as well as enabling opening and closing functions.
The application of thermoplastic plastics in exterior components primarily leverages their advantages in forming and processing, enabling the realization of complex designs with high production efficiency and consistent quality. Additionally, through synthesis and modification, plastics can achieve relatively high performance in certain aspects, such as high toughness and scratch resistance. Due to the special functions of automobiles, exterior component design must adhere to the principles of standardization, series production, and universality, while also meeting requirements for rationality, advanced technology, ease of maintenance, reliability, economy, and manufacturability.
The rearview mirror body mainly consists of a shell, mirror surface, and fixed cover plate. Since rearview mirrors are installed on the exterior of automobiles, they are exposed to long-term sun exposure and rain, harsh climatic conditions, and vibrations and impacts during vehicle operation. Therefore, the selection of materials for rearview mirrors must take into account requirements such as temperature, humidity, strength, impact resistance, and bending performance. Additionally, the materials must be resistant to aging, corrosion, and have good injection molding and paintability properties. Rearview mirror housings are made from heat-resistant materials such as ABS, PC/ABS, ASA, and PBT+GF. These materials offer excellent processing and molding properties, low creep performance, superior dimensional stability, high impact strength, and good aesthetic characteristics. Increasing the mold temperature appropriately can enhance the surface finish of the plastic parts.
The design of a car spoiler is inspired by aircraft wings. The ingenious design of wings allows air to flow through them while generating an upward lift force. The spoiler utilizes the opposite principle to create a downward force on the rear of the vehicle, preventing it from lifting off the ground at high speeds and ensuring a smoother ride during high-speed driving. Due to the large volume and heavy mass of car spoilers, the melt is exposed to heat for an extended period during the extrusion process, resulting in higher requirements for raw materials in blow molding. Generally, ordinary ABS materials have low melt strength and poor reprocessability during hollow blow molding, often resulting in issues such as insufficient melt strength of the molded blank and rapid sagging. This can lead to defects such as yellowing and brittleness of the finished product, uneven wall thickness, and rupture of the tube blank. Therefore, it is recommended to use blow molding-grade ABS or PC/ABS alloy materials with superior physical properties.
A car roof rack is a support structure installed on the vehicle roof to facilitate securing large items with straps. Based on size and design features, car roof racks can be categorized into single-layer racks, double-layer racks, Australian-style racks, and luxury racks, among others. They must ensure structural integrity under various complex loading conditions. Sufficient fatigue strength is required to prevent severe fatigue damage during high-speed driving or emergency braking. Typically, materials such as PC/PBT, PC/ASA, PC/ABS, and ASA are used for manufacturing.
